Skip to content
PermitBasis

Sherwood, AR · Pulaski County

Sherwood Commercial Roofing or Structural Repair Permit Fees and Submittal Checklist

Reroofing, roof replacement or structural repair on an existing commercial building.

01

Sherwood Fee Estimate

Fee Estimate

$

Permit valuation may differ from your construction budget when the city applies its own valuation method.

sq ft

Estimate · Sherwood, AR

Unavailable

Sherwood does not publish this fee schedule. Known fees below total $75.00. Call (501) 835-4753 for a quote.

Not included in this estimate

Trade permits (electrical, plumbing, mechanical); utility tap and impact fees, re-inspection fees, and other agency approvals.

Need sealed MEP drawings, permit expediting, or 3 bids from ACLB-licensed contractors in Sherwood?

Sources and Assumptions

Schedule
Sherwood Code Title 11 (§ 11.04.07)
Source reviewed on
October 20, 2026
Assumes
Commercial occupancy; $150,000 valuation and 12,000 sq ft as entered.

PermitBasis is an independent planning resource. The issuing authority determines final fees and requirements.

02

Common Project Values

Estimated Sherwood fees for commercial roofing or structural repair projects at six standard sizes, computed with the same rules as the calculator. Trade permits excluded.

  • Small reroof

    $25,000 · 2,500 sq ft

    Unavailable

  • Mid reroof

    $75,000 · 7,500 sq ft

    Unavailable

  • Structural repair

    $150,000 · 12,000 sq ft

    Unavailable

  • Full membrane

    $350,000 · 25,000 sq ft

    Unavailable

  • Roof + structure

    $750,000 · 40,000 sq ft

    Unavailable

  • Campus reroof

    $1,500,000 · 50,000 sq ft

    Unavailable

03

Central Arkansas Cost Comparison

The same project priced in all eight cities. Valuation-based cities (fee grows with project cost) and square-footage cities (fee grows with floor area) can differ widely for the same building. Full comparison →

04

Sherwood Submittal Checklist

Required and conditional documents for this project type. Confirm this requirement with the city.

Submittal Checklist0 of 7 ready
  1. Sherwood permit application

    Submit through Sherwood Engineering, Permits & Planning. Include the project address, parcel number, owner, contractor and declared valuation.

    Permit portal ↗
  2. Construction documents (digital PDF set)

    Architectural, structural, MEP and life-safety sheets. Under Arkansas law most commercial buildings need plans sealed by an Arkansas-licensed architect or engineer. Ask the city whether it accepts digital-only sets or also wants printed copies.

  3. Arkansas Fire Prevention Code review

    Commercial sets are reviewed for compliance with the Arkansas Fire Prevention Code (based on the IBC/IFC). Include life-safety plans, exit paths, fire-rated assemblies, and sprinkler and alarm shop drawings where provided.

    Arkansas State Fire Marshal ↗
  4. Arkansas Department of Health plumbing plan review

    Conditional

    Commercial plumbing and gas plans are reviewed by ADH (fee: 1% of the estimated plumbing and gas cost, $50 minimum, $500 maximum) unless a local certified plumbing inspector reviews engineer-prepared plans (A.C.A. § 17-38-204). Food service, medical and dental, child care and pools also need ADH program approvals.

    Applies when: Commercial plumbing work, food service, medical or similar uses

    ADH plumbing ↗
  5. Asbestos survey before renovation

    Federal NESHAP rules, administered by ADEQ, require an asbestos inspection by a licensed inspector before renovating or demolishing commercial buildings.

    ADEQ asbestos program ↗
  6. Arkansas contractor license verification

    Commercial projects of $50,000 or more (labor and materials) need a contractor licensed by the Arkansas Contractors Licensing Board (A.C.A. § 17-25-101). The building official must see proof of license before issuing the permit.

    ACLB license lookup ↗
  7. Trade permits from licensed trades

    Electrical, plumbing and mechanical permits are pulled separately by Arkansas-licensed master electricians, plumbers and HVACR contractors.

Permit office

Sherwood Engineering, Permits & Planning

Confirm hours and submittal format with the city before you go.

Inspection Roadmap

  1. 1

    Structural / deck

    Conditional

    After tear-off, before new roofing covers the deck

    When structural repair or deck replacement is part of the work

  2. 2

    Building final

    After roofing, flashing and penetrations are complete

05

Frequently Asked Questions

How much does a commercial roofing or structural repair permit cost in Sherwood, Arkansas?

Sherwood, AR does not publish the building permit fee and plan review fee for a $150,000 (12,000 sq ft) commercial roofing or structural repair in a form PermitBasis can confirm, so no total is estimated. Known fees add $75.00. Call Sherwood Engineering, Permits & Planning at (501) 835-4753 for a quote.

Does Sherwood, AR calculate building permits by square footage or project valuation?

Sherwood prices new homes at $0.16 per square foot under roof. Fees for other building work come from a schedule the city adopted by reference but does not publish, so PermitBasis shows them as unavailable. Trade permits are billed per item (openings, fixtures, equipment).

How long does commercial plan review take in Sherwood, AR and what does it cost?

Sherwood does not publish a plan review fee. The city does not publish a plan review turnaround time; ask the permit desk for the current queue when you submit.

Do I need an Arkansas commercial contractor license to pull a permit in Sherwood?

Yes, for commercial work of $50,000 or more. Under A.C.A. § 17-25-101, any project other than a single-family residence costing $50,000 or more in labor and materials requires an Arkansas Contractors Licensing Board commercial license, and the building official must see proof of license before issuing the permit. Residential builders and remodelers need an ACLB residential license for jobs over $2,000. Splitting a contract to stay under a threshold is not allowed. Licensed electricians, plumbers and HVACR contractors pull their own trade permits in Sherwood.

06

Sources and Assumptions

Schedule
Sherwood Code Title 11 (§ 11.04.07)
Source reviewed on
October 20, 2026
Data status
Some components are confirmed; unconfirmed components are marked Unavailable instead of estimated.
  • Work without a permit is a misdemeanor with fines of $100–$500 per offense (§ 11.01.04); no fee multiplier is published.
  • Fees for work other than new homes come from the schedule attached to Ord. 1599 / Ord. 2057, which is not published online. Re-inspection is $25.

PermitBasis is an independent planning resource. The issuing authority determines final fees and requirements.